This enclosure box is specifically for the stock Prusa MK2, MK3, MK3S, and MK3S+ without the MMU2 attachment. If you intend to get an MMU2 at a later date that is. The Prusa i3 line has the capabilities, fit, finish, and attention to detail of a much more expensive printer.
In a market awash with inexpensive printers full of crappy parts that wear out quickly, everything about the Prusa i3 is quality. Its hot end can print anything, there's a best-in-market removable bed, and the slicer is tuned to make the most of the printer.
The only thing the Prusa lacks is an enclosure box or case to make full use of its capabilities. Our Prusa enclosure kit retains the offensive odors and air contaminates from melting plastics and creates better-looking prints to boot.
This product is a professional-grade, cool-looking enclosure you can assemble in about an hour and works with a stock Prusa i3: no modifications needed. Advantages of adding a 3DUPfitters enclosure. Provides outside air to the power supply with no modifications to the printer. More flexibility to print different types of filaments, including ABS.A controlled temperature creates better quality prints. The enclosure kit works by retaining the bed's heat to bring the ambient temperature up high enough, stabilizing ABS and other filaments that expand when they cool. The optional fan will draw cold air across the power supply, simultaneously heating the air and cooling the supply.
The heated air circulates within the enclosure, providing a steading temperature. The expelled air can be vented into the room, sent through an optional air filter (not included), or vented to the outside via a hose. 3D Print Your Own Connectors. A lot of customers prefer to print their own connector pieces themselves.We get it: you've got a great 3D printer, and it is itching to print things. The kit includes the STLs for all 3D printed parts like corner connectors, knobs, vents, etc. Typically it takes about 48 hours to print everything you'll need with a. All parts are 3D printed in the best quality American-made ABS.
It not only will withstand the heat year after year, but it's also one of the most rigid plastics to add that will make the enclosure sturdier. If you still want to print your own parts, just remember that temperatures inside an enclosure will melt PLA, so you will get the best results with printing parts in a high-quality ABS, ASA, or Nylon. The catch-22 is you need an enclosure to print ABS! If you don't already have an enclosure, you. Just keep in mind that PETG is more flexible and will make the entire enclosure less rigid than if you had used ABS. Pro Quality American Made Acrylic. The panels are made in a factory in Ohio and cut on an American-built industrial laser, and then flat-packed for your assembly. All you need for assembly is just a hex wrench and a small Philips head screwdriver. Internal temperatures vary depending on the ambient room temperature outside the enclosure as well as where you measure the temperature. We use these enclosures to print both PLA and ABS daily, so rest assured the temperatures are "safe" to use. The entry-level model has all 3mm acrylic and is a great option for the hobbyist on a budget. The most popular model has a 6mm front and 3mm sides.The thicker front is a big improvement for the door. 6mm Front and Top, 3mm Sides. If you want to use 3Kg+ spools on top of the enclosure then the 6mm top upgrade is a must.
This is the configuration we use in our print farm and it's also popular with libraries and schools that need a sturdier enclosure at a good price. Note that because of the close tolerance around the power supply, the height of the printer must be stock for the MK3 with its rubber feet. The MK2 will also fit, but getting it to be the correct height will involve the use of one of the many feet available on Thingiverse.
The latest solution is a from one of our customers. 22.5" (Deep), 19" (Wide), 16 (Tall), 13 lbs. Fits the standard Prusa i3 MK3/MK3S and the MK2 with DIY feet. Acrylic front panel with frame, doors, injection-molded hinges, magnetic latch, custom-designed latch mount in ABS, steel strike plates, and matching screws. Acrylic sides and top with access ports for cables and filament.
The enclosure is designed to sit on a flat surface that acts as a bottom. 60x60mm 12.6 CFM USB-powered fan.If you don't wish to vent. USB power supply not included.
One hundred forty screws, nuts, bolts, and miscellaneous parts. Select the pulldown option to include 3D printed parts such as corner connectors, knobs, vents, grommets, etc. Are you desperate enough to read the.
This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printer Parts". The seller is "3dupfitters" and is located in this country: US. This item can be shipped to United States.